:: Super Soaker Iron Man 2 Water Blaster

.: Limited statistics measured at iSoaker.com

Manufacturer: Hasbro Inc.

Class: Elastic - Bladder

  Item Number: 93596
  Copyright Date / Release Date: 0 / 2010
  Patents:

  Availability: No Longer Made

Basic Statistics ::

  Weight: 1060.00 g (37.46 oz.)

  Reservoir Volume: 1190.00 mL (39.67 fl.oz.)

  Pressure Chamber Volume: 285.00 mL (9.5 fl.oz.)

  Pump Volume: 20 mL (0.67 fl.oz.)

iSoaker.com Ratings .:

Power: N/A

Range: N/A

Encumbrance: 55

Ergonomics: 65

Capacity: 55

Overall: N/A

Blaster Dimensions :: 41.0 cm (16.14 ") x 8.3 cm (3.27 ") x 30.0 cm (11.81 ")

Length x Width x Height

Version Colours .:

Body

Reservoir

Pressure Chamber

Detailing

Notes

::

Red

Yellow

Black / Orange

None

Nozzle Information: 2 (Main and "Flood") .:

Range (level)

Range (45°)

Output

iSoaker Output Rating

iSoaker Power Rating

Shot Time

Stream ::

N/A

mL/s (0 oz./s)

N/A

Flood Nozzle ::

N/A

Notes:

Most statistics are from models tested by iSoaker.com; individual performance may vary; some models exhibit greater variability than others (i.e. output, range, colours, etc.)
Please reference iSoaker.com if you use any information from any part of this website.

More Water Blaster Images Water Blaster Videos Water Blaster Internal Pictures Uses QFD / Fast-Fill Device

Note: the above statistics are from the Super Soaker Arctic Blast Review

The Super Soaker Iron Man 2 water blaster is more-or-less a recoloured Super Soaker Arctic Blast. Unlike the Arctic Blast, though, it is reported that it lacks the Max-Infusion cap and the stream nozzle's valve no longer uses the Max-D system, meaning it pulls smoothly open and close. However, as a working model is unavailable for review at iSoaker.com, little else is known about this blaster and how it performs compared to the base model.

See the Super Soaker Arctic Blast Review

:: Submitted Reviews

By: The Laminator | Posted: 20100809

Manufacturer:Hasbro Inc.
Pressurization System:Elastic Pressure
Reservoir Volume:~40 oz
Pressure Chamber Volume:~10 oz
Pump Volume:0.6 oz

Number of Nozzles:2

Nozzle 1:

Name: stream
Output: 1.2 oz/sec
Range(angled): 35-40 feet
Range(level): 20-25 feet

Nozzle 2:

Name: "blast"
Output: ~10 oz/sec
Range(angled): 30-35 feet
Range(level): 20-25 feet

Review:

:In my opinion, the Ironman blaster is better than the original blaster, but still not as good as the Flash Flood was. The Ironman blaster uses a pull-valve for the main trigger (stream), which is less prone to damage over time. the "blast" trigger, however, still uses the max-d setup. This was probably done to reduce the wasted pressure and increase the velocity of the blast. the blast shoots approx. 2.5 less oz. of water than the Flash Flood, but the blast has more force behind it, which cuts the shot time in half of the Flash Flood "flood". The blaster, also, lacks the max-infusion cap, though oddly, is shaped like one. If you can't find a Flash Flood, this makes an alright alternative (though not as powerful).

:: Super Soaker Iron Man 2 Water Blaster

.: Limited statistics measured at iSoaker.com

Statistics ::

Manufacturer: Hasbro Inc.

Class: Elastic - Bladder

Item Number: 93596 Copyright Date / Release Date: 0 / 2010 Patents: Availability: No Longer Made

Basic Statistics ::

Weight: 1060.00 g (37.46 oz.) Reservoir Volume: 1190.00 mL (39.67 fl.oz.) Pressure Chamber Volume: 285.00 mL (9.5 fl.oz.) Pump Volume: 20 mL (0.67 fl.oz.)