:: Water Warriors Black Widow
.: Statistics measured at iSoaker.com
Manufacturer: Buzz Bee Toys Inc.
Class: Air - Pressurized Reservoir
Item Number: 01120
Copyright Date / Release Date: 2003 / 2004
Patents:
Availability: No Longer Made
Basic Statistics ::
Weight: 490.00 g (17.31 oz.)
Reservoir Volume: 700.00 mL (23.33 fl.oz.)
Pressure Chamber Volume: N/A
Pump Volume: Air
iSoaker.com Ratings .:
Power: 4
Range: 70
Encumbrance: 40
Ergonomics: 65
Capacity: 35
Overall: 70
Blaster Dimensions :: 35.0 cm (13.78 ") x 8.0 cm (3.15 ") x 19.0 cm (7.48 ")
Version Colours .:
Body
Reservoir
Pressure Chamber
Detailing
Notes
1 ::
2 ::
Nozzle Information: 1 .:
Range (level)
Range (45°)
Output
iSoaker Output Rating
iSoaker Power Rating
Shot Time
Main ::
6.0 m (19.69')
9.0 m (29.53')
32.0 mL/s (1.07 oz./s)
3.77
2.26
7.0 s
Notes:
- Most statistics are from models tested by iSoaker.com; individual performance may vary; some models exhibit greater variability than others (i.e. output, range, colours, etc.)
- Please reference iSoaker.com if you use any information from any part of this website.
Own this product?
Submit a Review Online
Compare Products
Product Comparison Page
The Water Warriors Black Widow is the second smallest blaster of the Water Warriors line in 2004. Its design is similar to a Super Soaker Max-D 3000. However, unlike the smaller Max-D Super Soakers, the Water Warriors Black Widow has a guided pump and a pressure gauge.
The reservoir is opaque, making it difficult to determine how much water it has remaining. The reservoir is filled through an opening with an externally tethered cap. However, as this blaster requires that the reservoir be pressurized in order to push water out the nozzle, the cap must be secured tightly for the blaster to work well.
Maximum pressure is determined by the colour-changing pressure gauge at the side of the blaster. This gauge window shows all-green when maximum pressure is achieved. This works well except for the fact that the window region is quite small and not easily read from a distance. One minor complaint is that the size of the trigger-grip area is quite short, making it awkward to hold for those with larger hands.
The stream produced by the Black Widow is decent for a soaker of its size. Admittedly, it is a smaller soaker, thus has limited soaker power.
Overall, the Water Warriors Black Widow is a good lower-class water blaster. Great for backup or as a primary blaster in smaller skirmishes, this blaster can hold its own again other soakers of similar sizes. Just beware of soakers using constant stream-type technology.
Pros
Small, easy to pump and use, and has a good sized reservoir. Stream quite good and pressure gauge helps one determine how well the shot will fly.
Cons
No separate firing chamber. Pressure gauge can be hard to read when using. Trigger-grip region rather short.
Submitted Reviews:
By robotwarsrules | Posted: 20080917
Manufacturer:Buzz Bee Toys Inc.
Copyright:2003
Length:35.5 cm
Width:10 cm
Height:18 cm
Pressurization System:Air Pressure
Review: The Black Widow is a light weight blaster that cannot produce a very long or far stream, but I opened mine up and took out a pointless valve on the end of the pump tube and when it was back together I used it and found the range and shot time was highly increased!
blaster before I modded it 6 1/2
my blaster now 8 1/2
I now use it as a sidearm and it works perfectly.
Related Content .:
Product Listing Page | Water Warriors Product Evolution Tree
Water Warriors Air Pressure Based Systems
Additional Resources
Water Blaster: Basics | Care, Cleaning, and Storage | Soaker Use: Basics|Repair Articles|Pressurized Reservoir Tech Troubleshooting|Pressurized Reservoir Blaster Usage
Product Listing | Colour Listing | Series Listing | Product Comparison
Repair Guide | Tech Research | Timeline | The Armoury Gallery | Usage Tips
